1. S&w Revolver Serial Number Lookup
2. Smith & Wesson Mfg Dates
3. S&w Model 17 3 Dates
4. Smith And Wesson Model 36

The Smith & Wesson Model 36 (also known as the Chief's Special) is a revolver chambered for .38 Special. It is one of several models of J-frame revolvers. It was introduced in 1950, and is still in production in the classic blued Model 36 and the stainless steel Model 60.

History[edit]

The Model 36 was designed in the era just after World War II, when Smith & Wesson stopped producing war materials and resumed normal production. For the Model 36, they sought to design a revolver that could fire the more powerful (compared to the .38 Long Colt or the .38 S&W) .38 Special round in a small, concealable package. Since the older I-frame was not able to handle this load, a new frame was designed, which became the J-frame.

Smith and Wesson Serial Number Date of Manufacture J Frame Revolver Lookup. For models 36, 37, 38, 49, 50 and pre model number versions. 1950 = start at 1. Smith Wesson Dates Of Manufacture From Serial Numbers DOWNLOAD. Please enter the serial number below. Smith and wesson model 29 serial number database. Earlier models have them here s w. If you provide us with your serial number, those of us with a copy of the standard catalog of smith and wesson can look up the approximate date your. I am kind of surprised I can't find a list of Smith.

The new design was introduced at the International Association of Chiefs of Police (IACP) convention in 1950, and was favorably received. A vote was held to name the new revolver, and the name 'Chiefs Special' won.^[1][2] A 3-inch (76 mm) barreled version design went into production immediately, due to high demand. It was available in either a blued or nickel-plated finish.^[3] It was produced as the 'Chiefs Special' until 1957, when it then became the Model 36. The 'Chiefs Special' continued to be manufactured as a separate variant.

In 1951, Smith & Wesson introduced the Airweight Model 37, which was basically the Model 36 design with an aluminum frame and cylinder. The aluminum cylinders proved to be problematic and were abandoned in favor of a steel cylinder.^[3]

SW99 - The serial number is located on the frame at the rear of the pistol. For long guns manufactured in the early 1980's, please contact the following dealers for parts and service. Smith & Wesson discontinued these models and no longer has a parts inventory or offer repair service for these models.

S&w Revolver Serial Number Lookup

In 1989, Smith & Wesson introduced the LadySmith variant of the Model 36. This was available with 2 in (51 mm) or 3 in (76 mm) barrel and blued finish. This model also featured special grips designed specifically for women, and had 'LADYSMITH' engraved on the frame.^[4]

Approximately 615 Model 36-6 Target variations were produced. This variant had a 3-inch full lug barrel with adjustable sights and a blued glass finish.

Smith & Wesson Mfg Dates

In 2002, Smith & Wesson reintroduced the Model 36 with gold features (hammer, thumbpiece, extractor, and trigger), calling it the 'Model 36 Gold'. The gold color was actually titanium nitride.

In 2005, Smith & Wesson produced the 'Texas Hold 'Em' variant. This was produced with a blued finish, imitation ivory grips, and 24k gold plate engraving.

Many Model 37 variants with a lanyard ring attached were made for Japan. Part of this contract was cancelled, resulting in many of these being sold to a wholesaler, who then re-sold them for civilian use. These entered the civilian market in 2001. In 2006, the Model 37 was dropped from Smith & Wesson's catalog.

Serial number 337 was shipped to J. Edgar Hoover and is engraved with his name.

In 1958, Spanish manufacturer Astra developed a high quality revolver line based on this weapon, under the name of Astra Cadix, Astra 250 and Astra NC6.

Design and features[edit]

Designed to be small and compact, the Model 36 has been produced with 2-inch (1.875 inch actual length) or 3-inch barrels with fixed sights. A version with an adjustable rear sight, the Model 50 Chief's Special Target, was also produced in limited numbers with both 2-inch and 3-inch barrels.

Like nearly all other 'J-frame' Smith & Wesson revolvers, it has a 5-round capacity in a swing-out cylinder, and features an exposed hammer. It features a nickel-plated or blued finish and either wood or rubber grips.

Users[edit]

• Japan: Shipped 5,344 Model 37s in 2003^[5]and additional 5,519 in 2005 for the National Police Agency.^[6]
• Malaysia: From 1970 to 2000, the Model 36 is standard sidearm for plainclothed detective in Royal Malaysian PoliceSpecial Branch or Criminal Investigation Division before Glock 17 adoption. It also used by RELA Corps Medium/Lower Rank Officer (permanent or volunteer) as training or self-defence weapon before the adoption of the Glock 19/26 and HK USP 9mm and is still used until today.
• Malta: It was standard issue for the Mobile Squad in the Malta Police Force until the arrival of the Glock 17 in 2007. They have since then been withdrawn from active carry, but they are still all being kept in the General Police Headquarters in Floriana.
• Norway: Although never a standard service gun in Norway, it is kept in the Norwegian Police Service inventory as a pure self-defensive option, for off-duty officers who meet certain criteria.
• South Korea: In 1974, it was used in the failed attempt to assassinate South Korean president Park Chung-hee, killing his wife Yuk Young-soo instead. Five years later, M36 Chief Special was, once again, used to assassinate Park.
• United States: For many years, the Model 36 was the standard police detective and 'plainclothes man' carry weapon for many police agencies including the NYPD. Many police officers still use it or one of its newer Smith & Wesson descendants as a 'back up' weapon to their primary duty pistol or as their 'off-duty' weapon. For several years in the mid-1970s, the Model 36 was issued to and carried as a duty weapon by administrative and command staff of the NC State Highway Patrol, but it was later replaced when all troopers were required to carry the then duty issue weapon, the S&W Model 66 .357, which was in turn later replaced with the last Smith revolver, the Model 686, before the agency switched to semi-automatics in the early 1990s.

S&w Model 17 3 Dates

References[edit]

1. ^Ayoob, Massad. Greatest Handguns of the World (Krause Publications, Inc., 2010) p. 208
2. ^Jinks, Roy G. History of Smith & Wesson (Beinfeld Publishing,1977), p. 225.
3. ^ ^abArmed for Personal Defense by Jerry Ahern
4. ^'Standard Catalog of Smith & Wesson' By Jim Supica, Richard Nahas
5. ^'Department of State Letter on May 18, 2003'(PDF). US Department of State. Archived from the original(PDF) on October 16, 2011. Retrieved 2012-02-09.
6. ^'US Department of State Letter on September 6, 2005'(PDF). US Department of State. Archived from the original(PDF) on October 16, 2011. Retrieved 2012-02-09.

External links[edit]

The Smith & Wesson Model K-38 Target Masterpiece Revolver Model 14 is a six-shot, double-action revolver with adjustable open sights built on the medium-size 'K' frame. It is chambered for the .38 Special cartridge, and most were fitted with a 6 in (150 mm) or 8³⁄₈ in (210 mm) barrel. A small batch were made with 4 in (100 mm) barrels, and even fewer were made with 5 in (130 mm) barrels. First produced in 1947 and originally known as the K-38 Target Masterpiece, it was renamed the Model 14 in 1957 when all Smith & Wesson revolvers were given numerical model numbers. It is built on the same medium-sized frame (K-frame) as the seminal Smith & Wesson Model 10 ('Military and Police') revolver. The K-38 model was authorized for duty with the Los Angeles Police Department^[1] in the 1960s and early 1970s.

Variants[edit]

The Model 14 Masterpiece Single-Action was available in 1961 and 1962.^[2] It came with a 6 in (150 mm) barrel and functioned in single-action only. It was otherwise identical to the rest of the Model 14s.

Smith & Wesson also released a Model 14 in their 'Classics' line. A nickel-plated version^[3] has since been discontinued, but the blued-steel version^[4] is still available. Other than the finishes, the revolvers were identical with 6 in (150 mm) barrels, a pinned Patridge front sight, a micro-adjustable rear sight, and wood grips.

During the years 1965 - 1968 a serial number range of the Model 14-2 was acquired by the Dayton Gun Headquarters of Dayton, Ohio. Smith and Wesson allowed this gun distributer to block a number of serial numbers for a special run of 14-2 handguns. These handguns were distinctive in that they were all Model 14-2, 4' revolvers with a Baughman front sight and a mixture of standard or target hammers, triggers and stocks. The 'Dayton' guns are a hybrid involving a shortened Model 14 barrel with a Model 15 sight. The Dayton guns were made in four separate blocks of serial numbers. They are: 1) K623337 - K623737 (401 pieces); 2) K623857 - K624496 (640 pieces); 3) K660288 - K661087 (800 pieces); 4) K661389 - K 661585 (197 pieces) for a total of 2038 pieces; during years 1965 - 1968. Excerpt from: The Dayton Guns; An Early Example of Customer - Blocked Serial Numbers; Volume 30, #2 Autumn 1996; Smith and Wesson Collectors Association; author Mike Priwer.

See also[edit]

Smith And Wesson Model 36

References[edit]

1. ^http://www.lapdonline.org/lapd_equipment
2. ^http://www.pmulcahy.com/revolvers/us_revolvers_sw10-30.htm
3. ^http://www.smith-wesson.com/webapp/wcs/stores/servlet/Product4_750001_750051_766332_-1_770653_757964_757964_ProductDisplayErrorView_Y
4. ^http://www.smith-wesson.com/webapp/wcs/stores/servlet/Product4_750001_750051_766186_-1_757767_757751_757751_ProductDisplayErrorView_Y